Originally Posted by TJP
Just out of curiosity, what does the FSM say about replacing the PW regulator ad or Motor? i doubt they were assembled on the line with the 1/4 panels off . Additionally the dealer techs had to encounter this issue beer


That's a good point. The FSM was very vague. It never did explain what to do. Ask me about the scar on my forearm. As I recall if you raise the regulator to full lift you can remove the motor. The regulator is bottomed out against the stop. Removing it with the regulator in any other position loads the regulator gear to the motor gear. Then when you pop the motor off look out. OUCH.