Glass, and every other part is already out of the quarter.
Picture that I included was for reference on the clip location.
My regulator has a PW motor attached to it. No way the assembly can go into the quarter all connected.
Other members restoring a Charger with PW must have gone through this before, but I cannot find a thread that covers this.
I will try to document my efforts if successful to serve as a reference.
Mike
I cant say about the power window but the manual regulator it all comes out as a unit. You may have to unbolt the motor and then it will all come out. I recently finished a nut and bolt restoration on a 69 charger.