I checked the water pump pulley belt grooves and they are out of align with the grooves on the crank pulley by the same 3'8" as mentioned previously so I believe the balancer is not on all the way. I will have to get a puller to take it back off to measure the snout and the bore. Assuming the problem is that the balancer is not on all the way and I can get it all the way on using a balancer installation tool, being the timing marks on the balancer are the wrong way could I use timing tape instead? The reason I ask is I bought this balancer about 5 years ago so I know I can't return it but I would like to use it so I'm not out the price I paid for it.