Grinding weld on patch panel

Print Thread

Re: Grinding weld on patch panel [Re: GMP440] #2788268 06/22/20 09:49 PM 06/22/20 09:49 PM
Joined: Jan 2003 Posts: 1,629 OH Red383 OP top fuel
Red383 OP top fuel Joined: Jan 2003 Posts: 1,629 OH	Markz28 thanks for the tip about trimming the sanding discs with a tin snips. I would have never thought of that but it does work great at keeping the disc grinding good on the outer edge.

Entire Thread
Subject	Posted By	Posted
Grinding weld on patch panel	Red383	06/19/20 10:30 PM
Re: Grinding weld on patch panel	GMP440	06/19/20 10:54 PM
Re: Grinding weld on patch panel	Red383	06/19/20 11:23 PM
Re: Grinding weld on patch panel	Stanton	06/20/20 12:53 AM
Re: Grinding weld on patch panel	Red383	06/20/20 01:08 AM
Re: Grinding weld on patch panel	markz528	06/20/20 01:44 AM
Re: Grinding weld on patch panel	markz528	06/20/20 01:46 AM
Re: Grinding weld on patch panel	Neil	06/20/20 02:45 AM
Re: Grinding weld on patch panel	GMP440	06/21/20 10:40 PM
Re: Grinding weld on patch panel	Stanton	06/22/20 01:43 AM
Re: Grinding weld on patch panel	GMP440	06/22/20 01:59 AM
Re: Grinding weld on patch panel	PhillyRag	06/22/20 05:37 AM
Re: Grinding weld on patch panel	Red383	06/23/20 01:49 AM
Re: Grinding weld on patch panel	scatpacktom	06/23/20 02:00 AM
Re: Grinding weld on patch panel	ZIPPY	06/23/20 02:14 PM
Re: Grinding weld on patch panel	cudaman1969	06/23/20 05:28 PM
Re: Grinding weld on patch panel	PhillyRag	06/29/20 04:45 AM
Re: Grinding weld on patch panel	Quikshft	06/30/20 04:54 PM
Re: Grinding weld on patch panel	ZIPPY	07/14/20 05:01 PM
Re: Grinding weld on patch panel	gzig5	06/23/20 07:34 PM
Re: Grinding weld on patch panel	ZIPPY	06/26/20 06:04 PM
Re: Grinding weld on patch panel	moparx	06/27/20 04:36 PM
Re: Grinding weld on patch panel	gzig5	06/28/20 03:31 AM
Re: Grinding weld on patch panel	moparx	06/28/20 04:49 PM
Re: Grinding weld on patch panel	moparx	06/26/20 02:58 PM
Re: Grinding weld on patch panel	PhillyRag	06/20/20 02:53 AM
Re: Grinding weld on patch panel	Red383	06/20/20 10:40 AM
Re: Grinding weld on patch panel	dvw	06/20/20 12:38 PM
Re: Grinding weld on patch panel	440_Offroader	06/21/20 03:53 PM
Re: Grinding weld on patch panel	Red383	06/21/20 04:13 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To