Grinding weld on patch panel

Print Thread

Re: Grinding weld on patch panel [Re: dvw] #2787727 06/21/20 11:53 AM 06/21/20 11:53 AM
Joined: Dec 2012 Posts: 257 Alberta 4 440_Offroader enthusiast
440_Offroader enthusiast 4 Joined: Dec 2012 Posts: 257 Alberta	I use a light in behind the welded area (if you can) after grinding, to find any pin holes.

Entire Thread
Subject	Posted By	Posted
Grinding weld on patch panel	Red383	06/19/20 10:30 PM
Re: Grinding weld on patch panel	GMP440	06/19/20 10:54 PM
Re: Grinding weld on patch panel	Red383	06/19/20 11:23 PM
Re: Grinding weld on patch panel	Stanton	06/20/20 12:53 AM
Re: Grinding weld on patch panel	Red383	06/20/20 01:08 AM
Re: Grinding weld on patch panel	markz528	06/20/20 01:44 AM
Re: Grinding weld on patch panel	markz528	06/20/20 01:46 AM
Re: Grinding weld on patch panel	Neil	06/20/20 02:45 AM
Re: Grinding weld on patch panel	GMP440	06/21/20 10:40 PM
Re: Grinding weld on patch panel	Stanton	06/22/20 01:43 AM
Re: Grinding weld on patch panel	GMP440	06/22/20 01:59 AM
Re: Grinding weld on patch panel	PhillyRag	06/22/20 05:37 AM
Re: Grinding weld on patch panel	Red383	06/23/20 01:49 AM
Re: Grinding weld on patch panel	scatpacktom	06/23/20 02:00 AM
Re: Grinding weld on patch panel	ZIPPY	06/23/20 02:14 PM
Re: Grinding weld on patch panel	cudaman1969	06/23/20 05:28 PM
Re: Grinding weld on patch panel	PhillyRag	06/29/20 04:45 AM
Re: Grinding weld on patch panel	Quikshft	06/30/20 04:54 PM
Re: Grinding weld on patch panel	ZIPPY	07/14/20 05:01 PM
Re: Grinding weld on patch panel	gzig5	06/23/20 07:34 PM
Re: Grinding weld on patch panel	ZIPPY	06/26/20 06:04 PM
Re: Grinding weld on patch panel	moparx	06/27/20 04:36 PM
Re: Grinding weld on patch panel	gzig5	06/28/20 03:31 AM
Re: Grinding weld on patch panel	moparx	06/28/20 04:49 PM
Re: Grinding weld on patch panel	moparx	06/26/20 02:58 PM
Re: Grinding weld on patch panel	PhillyRag	06/20/20 02:53 AM
Re: Grinding weld on patch panel	Red383	06/20/20 10:40 AM
Re: Grinding weld on patch panel	dvw	06/20/20 12:38 PM
Re: Grinding weld on patch panel	440_Offroader	06/21/20 03:53 PM
Re: Grinding weld on patch panel	Red383	06/21/20 04:13 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To