Quote:

"Obviously, some items are not feasible (cost vs volume) to do but we can sure get working on some of this. Thanks for all your help and efforts."

This is a direct quote from one of the Howards Cams Tech guys! So keep the ideas coming on parts that you would buy if Howards Cams made them.

Howards Cams products are MADE IN THE USA!



nice thing with the small block stuff I mentioned, with a minor change, or a little thought into the design, they should be able to make a mopar powderforged rod from a 6.125" chevy blank, w/a little secondary machining change, same with a SBM stroker crank. the magnum spring could be applicable to other makes as well, it'd basically be a 1.65" or so IH spring w/~100-120 seat pressure, and a 1" or so coil bind height and somewhere between 300-350lb/in rate

for people requesting the rocker arms, I wonder how the powder forging technology would work in a rocker....

1976 Spinnaker White Plymouth Duster, /6 A833OD
1986 Silver/Twilight Blue Chrysler 5th Ave HotRod **SOLD!***
2011 Toxic Orange Dodge Charger R/T
2017 Grand Cherokee Overland
2014 Jeep Cherokee Latitude (holy crap, my daughter is driving)