Machining New Intake Angle - 440 in Car Now

Print Thread

Re: Machining New Intake Angle - 440 in Car Now [Re: ruderunner] #2458182 02/26/18 11:52 PM 02/26/18 11:52 PM
Joined: May 2003 Posts: 6,570 Downtown Roebuck Ont Twostick Still wishing...
Twostick Still wishing... Joined: May 2003 Posts: 6,570 Downtown Roebuck Ont	Originally Posted By ruderunner Enlarging the holes makes it easier to get the bolts in but doesn't get the sealing surfaces aligned. Or the ports. Kevin

Entire Thread
Subject	Posted By	Posted
Machining New Intake Angle - 440 in Car Now	PurpleBeeper	02/25/18 06:21 PM
Re: Machining New Intake Angle - 440 in Car Now	RapidRobert	02/25/18 06:40 PM
Re: Machining New Intake Angle - 440 in Car Now	PurpleBeeper	02/25/18 07:42 PM
Re: Machining New Intake Angle - 440 in Car Now	ruderunner	02/25/18 08:06 PM
Re: Machining New Intake Angle - 440 in Car Now	PurpleBeeper	02/25/18 09:20 PM
Re: Machining New Intake Angle - 440 in Car Now	AndyF	02/25/18 10:29 PM
Re: Machining New Intake Angle - 440 in Car Now	amxautox	02/25/18 10:41 PM
Re: Machining New Intake Angle - 440 in Car Now	pittsburghracer	02/25/18 10:58 PM
Re: Machining New Intake Angle - 440 in Car Now	PurpleBeeper	02/26/18 12:40 AM
Re: Machining New Intake Angle - 440 in Car Now	pittsburghracer	02/26/18 12:56 AM
Re: Machining New Intake Angle - 440 in Car Now	earlymopar	02/26/18 02:48 AM
Re: Machining New Intake Angle - 440 in Car Now	Cab_Burge	02/26/18 04:59 AM
Re: Machining New Intake Angle - 440 in Car Now	PurpleBeeper	02/26/18 12:15 AM
Re: Machining New Intake Angle - 440 in Car Now	ruderunner	02/25/18 11:53 PM
Re: Machining New Intake Angle - 440 in Car Now	amxautox	02/26/18 12:03 AM
Re: Machining New Intake Angle - 440 in Car Now	screamindriver	02/26/18 07:04 AM
Re: Machining New Intake Angle - 440 in Car Now	fastmark	02/26/18 03:27 PM
Re: Machining New Intake Angle - 440 in Car Now	PurpleBeeper	02/26/18 07:41 PM
Re: Machining New Intake Angle - 440 in Car Now	pittsburghracer	02/26/18 08:12 PM
Re: Machining New Intake Angle - 440 in Car Now	ruderunner	02/27/18 02:53 AM
Re: Machining New Intake Angle - 440 in Car Now	Twostick	02/27/18 03:52 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To