Thanks all for the comments and suggestions. I found the cam information.
Comp Cams 315R grind duration @.050 Int. 280. Exh. 284. Lobe lift Int. .420 Exh. .401. I have 1.5 Crane Gold roller rockers. The head gasket compressed height is .051". They are Fel-pro black. The compression ratio was calculated using these head gaskets and Stealth heads. I know the Stealth heads are not the best but they are what I could afford at the time. I am now stepping up to a better head package so that is why the post. If it helps the Stealth heads have been worked over pretty good they flow 292 @.600 lift on the intake.

Thanks,

Digger73 (Mike)