Originally Posted By dvw
A couple of things I see. Shiny bearings speaks of oil film break down. Cam bearings, oil pump, and drive bushing are all damaged. Looks like there wasn't enough film strength, lack of proper oil flow or inadequate oil for the job.
Doug


I agree....there's too much else going bad here to just be the cam, and if not corrected, it will happen again roller or not.

'68 Bee 383/TF/Factory Air...high school sweetheart
'67 GTX Clone project,500 six pack,Hemi4-speed,Dana
05 Dodge Viper, 505 V-10, 6-speed Tremec