Originally Posted By reno340
Originally Posted By John_Kunkel

Be sure the dipstick is reading correctly and you're not overfilling it. The FULL mark on the dipstick should be about 1/4" above the ledge where the dipstick tube enters the case.
Is there a way that I can Measure this without pulling the dipstick tube? I hate to have to lose all of that fluid. (I have a deep aluminium pan) The dipstick and tube are an Allstar Performance 69120 dipstick and tube.


Something I've wondered about, with a deep pan can you run a slightly lower amount of fluid(on the stick) since your fluid pick-up is lower too?