Means taking the intake off. If you're that concerned I'd put those two at max lift overnight and check the next day to see if they bleed down.
I was thinking on that idea too
.
I don,t want to think that a set of lifters wich has been running less than an hour in total are already junk.
We are going to start for the easiest thing, wich is preoling to see if they get pressure and set the valve adjustment again.
If not i will remove the intake to see what is happening here.
How much i should to loose the rockers adjusters? Just enough to evit tha the pushrod escapes from the adjuster ball ?
If loose them all the way off the cups are going to damage the rockers while i,m turning the crankshaft.
