Solid roller or solid flat tappet 528 Hemi?

Print Thread

Re: Solid roller or solid flat tappet 528 Hemi? [Re: wkeggenhoff] #1809112 04/22/15 12:21 AM 04/22/15 12:21 AM
Joined: Jan 2011 Posts: 4,785 Utah and Alaska astjp2 master
astjp2 master Joined: Jan 2011 Posts: 4,785 Utah and Alaska	Contact Chase Knight from Crane Cams, he put together a solid roller for me that has a wide lobe separation for good idle and pushrod oiling. 242@.050 and .620 lift 112 lsa....but this is on a 572 with low compression. Bullet cams can do something similar depending on all of your specifics. Tim 1941 Taylorcraft 1968 Charger 1994 Wrangler 1998 Wrangler 2008 Kia Rio 2017 Jetta I didn't do 4 years and 9 months of Graduate School to be called Mister!

Entire Thread
Subject	Posted By	Posted
Solid roller or solid flat tappet 528 Hemi?	wkeggenhoff	04/22/15 03:15 AM
Re: Solid roller or solid flat tappet 528 Hemi?	Dragula	04/22/15 03:25 AM
Re: Solid roller or solid flat tappet 528 Hemi?	Darryls-Demon	04/22/15 05:51 AM
Re: Solid roller or solid flat tappet 528 Hemi?	SSAAHemiFan	04/22/15 06:36 AM
Re: Solid roller or solid flat tappet 528 Hemi?	383man	04/22/15 07:06 AM
Re: Solid roller or solid flat tappet 528 Hemi?	Thumperdart	04/22/15 07:16 AM
Re: Solid roller or solid flat tappet 528 Hemi?	ademon	04/22/15 03:31 AM
Re: Solid roller or solid flat tappet 528 Hemi?	astjp2	04/22/15 04:21 AM
Re: Solid roller or solid flat tappet 528 Hemi?	an8sec70cuda	04/22/15 02:58 PM
Re: Solid roller or solid flat tappet 528 Hemi?	J_BODY	04/22/15 03:08 PM
Re: Solid roller or solid flat tappet 528 Hemi?	an8sec70cuda	04/22/15 03:30 PM
Re: Solid roller or solid flat tappet 528 Hemi?	DusterDave	04/22/15 04:58 PM
Re: Solid roller or solid flat tappet 528 Hemi?	572charger	04/23/15 12:11 PM

Hop To