Solid roller or solid flat tappet 528 Hemi?

Print Thread

Solid roller or solid flat tappet 528 Hemi? #1809055 04/21/15 11:15 PM 04/21/15 11:15 PM
Joined: Mar 2008 Posts: 73 Toronto,Canada W wkeggenhoff OP member
wkeggenhoff OP member W Joined: Mar 2008 Posts: 73 Toronto,Canada	Time to upgrade came from hydralic to something else I guess after having a lifter fall apart Ray Barton says solid flat tappet, package he has is streetable for $1100(cam, special lifters,push rods, springs retainers etc. Tim Banning (FHO)says you can make a solid roller live on street. Don't know which way to go ? Any recomendations ? Street driven 69 charger 5spd, 3:73 gear. Currently has single 870 cfm dual plane instake.Manual brakes. Want this thing to cam over nicely and sound like a hemi should. Last edited by wkeggenhoff; 04/21/15 11:18 PM. 69 dodge charger,528 Hemi,Keisler TKO 5spd, Mosier 60 rear end

Entire Thread
Subject	Posted By	Posted
Solid roller or solid flat tappet 528 Hemi?	wkeggenhoff	04/22/15 03:15 AM
Re: Solid roller or solid flat tappet 528 Hemi?	Dragula	04/22/15 03:25 AM
Re: Solid roller or solid flat tappet 528 Hemi?	Darryls-Demon	04/22/15 05:51 AM
Re: Solid roller or solid flat tappet 528 Hemi?	SSAAHemiFan	04/22/15 06:36 AM
Re: Solid roller or solid flat tappet 528 Hemi?	383man	04/22/15 07:06 AM
Re: Solid roller or solid flat tappet 528 Hemi?	Thumperdart	04/22/15 07:16 AM
Re: Solid roller or solid flat tappet 528 Hemi?	ademon	04/22/15 03:31 AM
Re: Solid roller or solid flat tappet 528 Hemi?	astjp2	04/22/15 04:21 AM
Re: Solid roller or solid flat tappet 528 Hemi?	an8sec70cuda	04/22/15 02:58 PM
Re: Solid roller or solid flat tappet 528 Hemi?	J_BODY	04/22/15 03:08 PM
Re: Solid roller or solid flat tappet 528 Hemi?	an8sec70cuda	04/22/15 03:30 PM
Re: Solid roller or solid flat tappet 528 Hemi?	DusterDave	04/22/15 04:58 PM
Re: Solid roller or solid flat tappet 528 Hemi?	572charger	04/23/15 12:11 PM

Hop To