Quote:

Try making the bottom brackets set at 90 degrees apart from to each other, these types of throttle linkage take time and effort to get correct. The dang mounting hieght on the side pivots above the carbs can affect them Take your time, have fun and let us know your results



I think I'll go ahead and drill/tap the manifold to accept the pivot directly and buy a longer linkage rod. I spent a bit of time modifying and fooling with the adapter piece and decided it will all work much better located farther outboard on the manifold flange. I will have to move the throttle linkage over as well. Thanks for taking a look Cab! And thanks for selling me the velocity stacks!
I have been doing this engine project (in duplicate) for a long time and it's nice to see stuff going together and fitting the way it should. It sure is great to be back in a decent shop with all of my tools organized.

Here is a look at the back of the intake valve from the carb flange. Ooh la la.