Quote: I believe it to be a great long term investment. Especially if piston speed and bob weight are high. I talked to Crower about offset grinding this crank at 4.15 stroke with 2.375 journals to 2.100 SBC journals, and the response was it would be fine!
Mine would be a 4.5 stroke. I've had input to the fact that I should go bigger on the stroke. 7.1 steel rod with the 2.2 journal. that comes in at 823 grams. Not sure about the 4.500 pistons yet. I'm not doing those till the block is sitting in front of me. I'm also not familiar with a center counter weight crank.
Greg
----------------------------------------------------------------- Cost is irrelevant, making memories is far more valuable!
