Quote:

The wilwood kit is less than 700$, and you also need the brakehoses. Otherwise it required just adapterplatess between the spindle and caliber adapter, which I made out of 3mm aluminum sheet, also had to drill and tap one bolt hole to the spindle and that's baout it. I can take pics of it if interested, overall it was a one day job including the "design". Oh yes, and almost forgot it saved over 50 lbs over the '73 factory discs.




THAT WOULD BE SWEET!
if it is no problem to adapt the small 11" inchers to c-body spindels,
it can not be a big problem to adapt the 12,19" big disc kits as well
to c-body spindles. IF they fit in the 15" wheels.?! should be the same procedure?
you just have to find a blind german technical inspector saying: they feel original


Hamburg/Germany

69 Chrysler 300
446cui Dual Quad
12.64 @ 110.7