Quote:

Quote:

Im guessing your core is in the 26x19 range. One of these would cure the fan problem http://www.etrailer.com/Merchant2/graphics/00000001/pics/d/1/d16826_1000.jpg



I cant see if that has a (spill ring) around the perimeter
but a fan with a spill ring is much more efficient
over one that doesnt... its like the wing tiplets
on a jet plane... it doesnt allow the air to fall off
the end of the wing.. same thing on a fan blade..
dont waste the air off the ends(thats moves the most
air till it goes sonic)



The blade ends are encircled. My Spals are that way as well. The fan setup pictured is rated at 4000cfm. I've found that if they are not at least 3000cfm you're wasting your money and time.

Mopar to the bone!!!