How long would a 7 1/4" last... . . .

Print Thread

Re: How long would a 7 1/4" last... . . . [Re: Pale_Roader] #1393834 02/26/13 10:42 AM 02/26/13 10:42 AM
Joined: Aug 2003 Posts: 2,143 Port Saint Lucie, FL ChallengerGary top fuel
ChallengerGary top fuel Joined: Aug 2003 Posts: 2,143 Port Saint Lucie, FL	I grenaded a 7-1/4 rear that I had in a Challenger a few years ago just one week after I swapped a warmed over 360 in place of the tired 318 that was in front of it before. All it took was one slight punch while going around a corner. Snapped the tail shaft on my transmission at the same time. Not fun

Entire Thread
Subject	Posted By	Posted
How long would a 7 1/4" last... . . .	Pale_Roader	02/26/13 12:33 PM
Re: How long would a 7 1/4" last... . . .	moparmike1	02/26/13 01:07 PM
Re: How long would a 7 1/4" last... . . .	horsepower.2007	02/26/13 01:44 PM
Re: How long would a 7 1/4" last... . . .	Pale_Roader	02/26/13 02:03 PM
Re: How long would a 7 1/4" last... . . .	Pale_Roader	02/26/13 02:00 PM
Re: How long would a 7 1/4" last... . . .	moparmike1	02/26/13 02:18 PM
Re: How long would a 7 1/4" last... . . .	Pale_Roader	02/26/13 02:33 PM
Re: How long would a 7 1/4" last... . . .	dynamite	02/26/13 02:37 PM
Re: How long would a 7 1/4" last... . . .	ChallengerGary	02/26/13 02:42 PM
Re: How long would a 7 1/4" last... . . .	Michael Ecks	02/26/13 11:43 PM
Re: How long would a 7 1/4" last... . . .	VincentVega	02/26/13 11:53 PM
Re: How long would a 7 1/4" last... . . .	pinkduster	02/27/13 02:42 AM
Re: How long would a 7 1/4" last... . . .	Pale_Roader	02/27/13 12:02 PM
Re: How long would a 7 1/4" last... . . .	Pale_Roader	02/27/13 11:59 AM
Re: How long would a 7 1/4" last... . . .	Pale_Roader	02/27/13 11:57 AM
Re: How long would a 7 1/4" last... . . .	scratchnfotraction	02/26/13 02:37 PM
Re: How long would a 7 1/4" last... . . .	Pale_Roader	02/26/13 02:43 PM
Re: How long would a 7 1/4" last... . . .	scratchnfotraction	02/26/13 10:01 PM
Re: How long would a 7 1/4" last... . . .	dOc …	02/26/13 10:06 PM
Re: How long would a 7 1/4" last... . . .	franks lil red	02/26/13 11:11 PM
Re: How long would a 7 1/4" last... . . .	469runner	02/26/13 11:24 PM
Re: How long would a 7 1/4" last... . . .	Pale_Roader	02/27/13 11:53 AM
Re: How long would a 7 1/4" last... . . .	GomangoCuda	02/27/13 02:38 PM
Re: How long would a 7 1/4" last... . . .	Mapandjlp	02/27/13 03:08 PM
Re: How long would a 7 1/4" last... . . .	ChallengerGary	02/27/13 03:36 PM
Re: How long would a 7 1/4" last... . . .	Mapandjlp	02/27/13 03:43 PM
Re: How long would a 7 1/4" last... . . .	Rick_Ehrenberg	02/27/13 05:46 PM
Re: How long would a 7 1/4" last... . . .	Pale_Roader	02/28/13 01:06 PM
Re: How long would a 7 1/4" last... . . .	JDMopar	03/01/13 06:35 AM
Re: How long would a 7 1/4" last... . . .	DaytonaTurbo	03/01/13 06:49 AM
Re: How long would a 7 1/4" last... . . .	Pale_Roader	03/01/13 10:42 AM
Re: How long would a 7 1/4" last... . . .	slantzilla	03/01/13 11:49 AM
Re: How long would a 7 1/4" last... . . .	Pale_Roader	03/02/13 11:51 AM
Re: How long would a 7 1/4" last... . . .	Pale_Roader	03/01/13 10:32 AM
Re: How long would a 7 1/4" last... . . .	Pale_Roader	02/28/13 12:55 PM
Re: How long would a 7 1/4" last... . . .	340duster340	03/03/13 03:28 AM
Re: How long would a 7 1/4" last... . . .	Pale_Roader	02/28/13 12:42 PM
Re: How long would a 7 1/4" last... . . .	dustergirl340	02/27/13 06:21 PM
Re: How long would a 7 1/4" last... . . .	Pale_Roader	02/28/13 12:39 PM
Re: How long would a 7 1/4" last... . . .	RoadRunnerLuva	03/03/13 12:05 AM
Re: How long would a 7 1/4" last... . . .	RoadRunnerLuva	03/03/13 12:18 AM
Re: How long would a 7 1/4" last... . . .	Pale_Roader	03/03/13 01:05 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To