GM metric rear disc conversion

Print Thread

Re: GM metric rear disc conversion [Re: JERICOGTX] #1313401 09/30/12 10:04 PM 09/30/12 10:04 PM
Joined: Jan 2004 Posts: 3,838 Central Missouri Fort Leonard... mopar65 master
mopar65 master Joined: Jan 2004 Posts: 3,838 Central Missouri Fort Leonard...	Quote: That is the bracket you will need. As for where it gets welded, that depends on the rotor used. From what I can tell the hat of the Jeep rotor is deeper then the Explorer rotor. That will change the location of the caliper, and where the mounting bracket is located. Jeff well i guess i will wait and see which rotor you use.lol also i think you have a dana 60 in your car right? my car has a 8-3/4 with moser axles and green bearings. so i wonder if the measurements would be in the same place? probably not just asking. also what do you do about the backing plates for the drum breaks? i mean can you just pull them off and bolt the axle back to the axle housing?? sorry for all the questions.Bobby 3520 pound race ready 1973 Street/Strip Dodge Dart - Stock stroke 440/727 10.49 @ 125.0 on 93 pump gas & ET Street Radials. More to come... ( SGT Miller) Proudly served 12 years in the US ARMY RESERVES support our troops

Entire Thread
Subject	Posted By	Posted
GM metric rear disc conversion	JERICOGTX	10/01/12 12:57 AM
Re: GM metric rear disc conversion	mopar65	10/01/12 01:09 AM
Re: GM metric rear disc conversion	JERICOGTX	10/01/12 01:19 AM
Re: GM metric rear disc conversion	440W8 Duster	10/01/12 01:24 AM
Re: GM metric rear disc conversion	mopar65	10/01/12 02:31 AM
Re: GM metric rear disc conversion	earthmover	10/01/12 02:37 AM
Re: GM metric rear disc conversion	JERICOGTX	10/01/12 02:41 AM
Re: GM metric rear disc conversion	mopar65	10/01/12 02:52 AM
Re: GM metric rear disc conversion	mopar65	10/01/12 02:53 AM
Re: GM metric rear disc conversion	440W8 Duster	10/01/12 03:43 AM
Re: GM metric rear disc conversion	mopar65	10/01/12 03:56 AM
Re: GM metric rear disc conversion	440W8 Duster	10/01/12 04:07 AM
Re: GM metric rear disc conversion	DemonDust	10/01/12 06:09 AM
Re: GM metric rear disc conversion	Dartin	10/01/12 10:26 AM
Re: GM metric rear disc conversion	sbhpcb	10/01/12 10:38 PM
Re: GM metric rear disc conversion	RodStRace	10/01/12 10:51 PM
Re: GM metric rear disc conversion	dogdays	10/01/12 11:22 PM
Re: GM metric rear disc conversion	mopar65	10/01/12 11:58 PM
Re: GM metric rear disc conversion	Dartin	10/02/12 01:14 AM
Re: GM metric rear disc conversion	DemonDust	10/02/12 01:50 AM
Re: GM metric rear disc conversion	mopar65	10/02/12 03:36 AM
Re: GM metric rear disc conversion	DemonDust	10/02/12 04:21 AM
Re: GM metric rear disc conversion	Charger453	10/21/12 09:30 AM
Re: GM metric rear disc conversion	J_BODY	10/21/12 07:28 PM
Re: GM metric rear disc conversion	toplescuda	10/22/12 06:53 AM
Re: GM metric rear disc conversion	mopar65	10/02/12 03:41 AM
Re: GM metric rear disc conversion	Dartin	10/02/12 10:21 AM
Re: GM metric rear disc conversion	JERICOGTX	04/24/13 12:46 AM
Re: GM metric rear disc conversion	dogdays	04/24/13 02:02 AM
Re: GM metric rear disc conversion	JERICOGTX	04/24/13 02:05 AM
Re: GM metric rear disc conversion :UPDATE	JERICOGTX	04/25/13 02:41 PM
Re: GM metric rear disc conversion :UPDATE	The Sphinx	04/01/15 04:06 AM
Re: GM metric rear disc conversion	mopar65	10/01/12 01:43 AM
Re: GM metric rear disc conversion	JERICOGTX	10/01/12 01:52 AM
Re: GM metric rear disc conversion	earthmover	10/01/12 01:57 AM
Re: GM metric rear disc conversion	mopar65	10/01/12 02:11 AM
Re: GM metric rear disc conversion	mopar65	10/01/12 02:04 AM
Re: GM metric rear disc conversion	JERICOGTX	10/01/12 02:06 AM
Re: GM metric rear disc conversion	mopar65	10/01/12 02:17 AM
Re: GM metric rear disc conversion	JERICOGTX	10/01/12 02:23 AM
Re: GM metric rear disc conversion	mopar65	10/01/12 02:28 AM
Re: GM metric rear disc conversion	PS Arrow	11/04/12 04:26 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To