Quote:

wow those are crazy prices. You could build a 700hp 440 for 10k. That's a ton of cash for a SB. Sorry 15-18k for a small block, unless it was a "rule" thing no way I'd drop that kind of cash into one. You could probably do a Hemi for that kind of money.
I thought there was a company selling a 500hp BB for 5k not to long ago?
http://www.ebay.com/itm/Big-Block-Mopar-...=item5647506ae4 525HP just under 7k
http://www.ebay.com/itm/470-CID-Mopar-st...=item3cc294d4f8
600HP under $6000
Why on earth would anybody buy any of those units form MP?




Quality = $$$$$ look at those motors you listed not real high quality parts doing a quick look I seen they had cheapo KB hyper pistons a stock used crank and rods stock block I mean nothing special

now look at my quality race motor

1- 4 bolt X-block = 1800.00
1- new challies crank = 990.00
1- set custom diamond pistons = 1000.00
1- comp custom solid roller = 300.00
1- set crane solid roller lifters = 550.00
1- set scat h beam rods = 350.00
1- set CNC indybrock heads with
Ferria valves,pac springs,
pac titanium retainers = 3500.00
1- set harland sharp rockers = 700.00
1- billet roller chain and gears = 100.00
1- ATI dampner = 400.00
1- set ARP head studs = 150.00
1- set ARP main studs = 75.00
1- used M1 intake ported = 175.00
1- set Cometics = 150.00
1- oil pump = 50.00
1- used milodon pan/ new pick up = 150.00
1- new timing cover = 150.00
1- set manton push rods = 125.00
1- machine shop bill = 1100.00
-----------------
total 11,715

and that does not include the rest of the gaskets,or the valve covers,carb,distributor,plugs wires ect ect

but I had a motor making well over 600 hp that was very reliable always ran the number and had less than 3% leakdown after 150 passes and the new owner is still beating on it and as long as he takes care of it it will last a long time.

Last edited by dusturbd340W5; 02/23/12 06:06 PM.
70 duster full chassis super pro 416 CNC Indybrock heads 727 w/brake

best so far 1.212 60 6.219 in 1/8 at 110.88 9.768 at 137.81 1/4