Quote:

Quote:

If I use the RPM now then it would not accept paint when I get around to re-assembly, correct? Do you have any suggestions?



We ran into the same scenario when restoring some of the suspension pieces on the Valiant. Various parts were completed and set aside for months before they were ready to be assembled. I suggest completely treating the parts with RPM and when you are ready to re-install them, take some lacquer thinner to the small areas that will be painted. Put the paint marks back on those bare areas that have been wiped off with the solvent. After the paint marks dry, re-treat those areas with RPM. It will not hurt the new paint and everything will be sealed and protected from moisture! This can all be done within a 24 hour period so you won't have to worry about the parts rusting again.




Thanks, great suggestion - thats what I'll plan on doing!