Quote:

here is the date and the numbers on the side of the motor, does anybody have the specs by using only the numbers?


There's no way to tell what cam or pistons are in it now since it's been rebuilt? Hopefully, it still has the forged crank? Someone with experience can tell by looking at it. A machine shop could determine the specs on it but they probably have to remove one head. You can get some idea of what the original specs were if you post a photo of the top engine pad. It's the flat area to the right of the distributor on the drivers' side with numbers and letters stamped on it. It should at least say E440 with some other letters and numbers. You can get an idea of what body it came out of from the partial VIN stamped in the milled area on the bottom of the side of the motor on the passenger side (just above the oil pan rail).

6273706-Originalblock.JPG (102 downloads)