Here are some more from today. Boy, it's getting closer...

As I saw her when I got there next to the Spoiler..


The hood, deck lid and front valance ready for installation and buffing...


Right frontal view... Lookie at those lil' holes in the door...


Left rear...


I tried to make sure they didn't smooth out the factory seam there between the end cap and quarter.. I also made sure the gaps between the rear valance and end caps were exactly the same as original... You'll notice the dark primer color under the car.. Some would have had more overspray, some less... I let things fall as they may treating the painter as an assembly line painter back in the day..


Another shot of the underside and the effort I made to duplicate the OEM primer/overspray. It may not be "perfect", but she's mine..


Frontal picture of the underside.. Bill will fade some more overspray from the front both on the inside framerails and floorpan behind the firewall-2-floorpan pinch weld.


Great looking color..


Engine bay shot. There is some touch up to do on the bolts and fasteners. The fenders were temporarily placed and fitted. Then, the body sealer will be placed in between the inner fender panels and fenders. Battery tray attach hardware will be painted as well just like in the day.


Frontal shot...


Another side view...


Finally image for today...............