|
Re: HELP! This is driving me crazy... [LONG]
[Re: RapidRobert]
#358415
06/27/09 01:40 PM
06/27/09 01:40 PM
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
Quote:
Quote:
If I have the #1 piston at TDC, how exactly do I check to make sure that the cam is correctly timed?
With the timing marks on TDC #1 compression, #6 should be on "rockover" which means that as you move the crank slightly back & forth(either side of TDC)on the harmonic dampener the #6 lifters will be at the same height & both moving.
Don't rely on this. Few modern cams are at "split overlap" which is what you are referring to, although this might be "OK" as a quick check, it's not difinitive
|
|
|
|
|
|