Studs are new Strange units , shanks are 11/16 dead on.
Thread ends are 5/8.
I ordered them to be long enough on the shank for the brake hat , weld wheel center sections, then I have to spacer/washer, then the 15/16's nut.
These are Mark Williams axles so- should be straight on hole bores/spacing.

Hell, I can order anything for a freaking Chevrolet and it fits- no problems.
Nothing for the Mopars has fit other than engine/transmission internals and your parts- literally nothing else has fit/ worked- period.

I have 14k worth of parts sitting here and so far- nothing but pure hell and these "Race Parts" companies don't have help any different than Autozone.

I take that back- all of Strange's stuff has fit/worked properly.

I guess im just going to eat the one hat, send everything Wilwood back and by Strange or something.
I simply cannot keep working 12-14 hr days and not getting 6 hours of real work done.

I put a whole new suspension- front and rear, tubulars, anti squat , disks etc on this 65 chevy truck in a day and a half-every piece was correct, everything fit as expected.

Freaking Mopar Major suppliers are useless .

arrgghh