For sure the low-ish lift of the cam(for this combo) doesn't play into the -1's attributes, especially earlier ones.

The last set I did(with cnc'd chambers) flowed 297@.600 ootb, and about 340@.600 after proper prep.

I feel like the 10.5cr is a bit low for the basic combo as well.

If the heads were similar to the last ones I did, and I had it on our dyno here, I'd be looking to be in the 650+ range........ It is a 511 after all.
I'd have used 1.6 rockers for a cam like that in this type of build.