Originally Posted By BradH
Originally Posted By RAMM
The cross section of the port was 2.850" which was the target for maximum torque over the entire RPM range.

Two questions:
1. Are you talking about your super modified Victors, or the Procomps you also used?
2. Is the 2.85" measurement the Average CSA, or the Minimum CSA?


1. The Eddy victors NOT the Pro-Comps.

2. 2.85" is the minimum CSA of these heads.

Thanks, J.Rob

2009 PHR\EMC Competitor
2010 PHR\EMC Competitor
2011 PHR\EMC Competitor
2012 PHR\EMC Competitor
2013 PHR\EMC Competitor
2014 HotRod/EMC Competitor
2015 HotRod/EMC NoShow
2016 HotRod/EMC 3rd place SPEC Bigblock
2018 HotRod/EMC 7th place G3