Engine Masters - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Engine Masters

Print Thread

Re: Engine Masters [Re: RAMM] #2015140 02/19/16 01:04 AM 02/19/16 01:04 AM
Joined: Jan 2003 Posts: 15,439 Val-haul-ass... eventually B BradH Taking time off to work on my car
BradH Taking time off to work on my car B Joined: Jan 2003 Posts: 15,439 Val-haul-ass... eventually	Originally Posted By RAMM The cross section of the port was 2.850" which was the target for maximum torque over the entire RPM range. Two questions: 1. Are you talking about your super modified Victors, or the Procomps you also used? 2. Is the 2.85" measurement the Average CSA, or the Minimum CSA?

Entire Thread
Subject	Posted By	Posted
Engine Masters	Street Monkies	02/18/16 07:49 PM
Re: Engine Masters	HotRodDave	02/18/16 07:56 PM
Re: Engine Masters	fbs63	02/18/16 08:16 PM
Re: Engine Masters	Streetwize	02/18/16 10:20 PM
Re: Engine Masters	Von	02/18/16 11:36 PM
Re: Engine Masters	Street Monkies	02/19/16 01:50 AM
Re: Engine Masters	RAMM	02/19/16 05:00 AM
Re: Engine Masters	RAMM	02/19/16 04:45 AM
Re: Engine Masters	CTD5.9	02/18/16 08:18 PM
Re: Engine Masters	RAMM	02/19/16 04:48 AM
Re: Engine Masters	Street Monkies	02/18/16 08:45 PM
Re: Engine Masters	RAMM	02/19/16 04:55 AM
Re: Engine Masters	BradH	02/19/16 05:04 AM
Re: Engine Masters	RAMM	02/19/16 05:09 AM
Re: Engine Masters	Street Monkies	02/19/16 05:46 AM
Re: Engine Masters	RAMM	02/19/16 02:52 PM
Re: Engine Masters	Street Monkies	02/19/16 09:04 PM
Re: Engine Masters	tsanchez	02/18/16 08:56 PM
Re: Engine Masters	Thumperdart	02/19/16 03:08 AM
Re: Engine Masters	RAMM	02/19/16 05:22 AM
Re: Engine Masters	Thumperdart	02/19/16 10:33 PM
Re: Engine Masters	Street Monkies	02/18/16 09:29 PM
Re: Engine Masters	HotRodDave	02/18/16 11:01 PM
Re: Engine Masters	RAMM	02/19/16 05:06 AM
Re: Engine Masters	72Swinger	02/19/16 01:19 AM
Re: Engine Masters	CTD5.9	02/19/16 02:53 AM
Re: Engine Masters	RAMM	02/19/16 05:20 AM
Re: Engine Masters	RAMM	02/19/16 05:12 AM
Re: Engine Masters	RAMM	02/19/16 04:40 AM
Re: Engine Masters	deaks	02/19/16 05:13 PM
Re: Engine Masters	A/MP	02/19/16 05:22 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1