ok, for heads, contact www.cmengines.com ask for a quote for some enginequest 318B heads with oem valves & keepers and GM3100 springs and retainers set up at 1.65" IH.

I'd walk away from the chinese heads, I'd go for rebuilt OEM over those.

the EQ 318 heads are magnum heads, made in new zeeland and sold as "iron rams" by hughes. last year I got a quote from CME for $650/pr set up like this. the 318B uses an LA intake pattern. for a 318 I'd use an eddie performer intake (can find used for about $100). I'd snag some junkyard rocker arms.

the GM 3100 springs are a beehive spring w/about 350 lb/in rate and a 1.065" coil bind height. search the "best of" section for "cheap magnum spring" for more info.

for a cam, I'd probably look at a comp XE256.

for kickdown, I modded my 2bbl kickdown to work with an eddie RPM air gap.....

1976 Spinnaker White Plymouth Duster, /6 A833OD
1986 Silver/Twilight Blue Chrysler 5th Ave HotRod **SOLD!***
2011 Toxic Orange Dodge Charger R/T
2017 Grand Cherokee Overland
2014 Jeep Cherokee Latitude (holy crap, my daughter is driving)