These are pretty common for Street Rod and such now. You can get them with aluminum pump bodies (1.4lbs lighter than identical iron version).

Like this: http://www.detroitspeed.com/Steering/090901-aluminum-steering-pump.html

I bought this at the Fall Fling show last Saturday for $5. I figured it would be a no brainer aluminum housing (most are iron) for mockup. This turned out to be brand spanking new, just covered in dust!!

They also use this same pump housing setup in Circle Track cars for remote reservoirs and AN fittings.

I've also got a used KRC pump and remote reservoir and lines for mockup.

Deal is the "Dodge 360" bracket KRC sells is for a Magnum motor and you have to add a brace to make it work: http://www.jegs.com/i/KRC/612/31515000/10002/-1?parentProductId=

Quote:

---

Note: This bracket uses three mounting points. Some engines may not have the upper right mount (facing the bracket) and may require the creation of a brace.

---

AndyF? (www.arengineering.com)

Jerry? (www.sdconcepts.com)

others?

I think because KRC list's a "Dodge 360" bracket, the rest of the aftermarket thinks the market is covered for this part/need.