Quote:
Quote:
I used to use the bottom one in the pic below but was then introduced to the one above it and will never use anything else.
I have that one on top and I cant get it to sqeeze enough. Tried a few different clockings with it and no matter what I do where that compressor overlaps, I have rings not compressed enough.
Reading back through this thread....I saw this when my Diamond pistons didn't have enough depth in the ring grooves. Ain't the Gen 3 stuff fun!!  I was having 2nd thoughts about my ability to build engines for awhile!!! My first Gen 3 Hemi and all these problems...  wrong piston specs first, finally get that corrected, then wrong rings,, 
If you like drag racing, support your local track.
| 
