Quote:

I found these ftting when researching info for my NV4500 swap.

if yours has the roll pin/o-ring 90* fitting or a straight fitting, you can use the russel clutch/brake line fitting for dodge/jeep to run a -3AN/-4AN line.

I was looking to replace the plastic line for mine. you only can get a stock factory pre-bent plastic line when buying a complete hydro clutch system that comes pre-bled and ready to use.

I got my hydro MC/slave cyl from parts geek.com they have them for newer truck also that have the clutch/N-safty switch on the MC.