07 2500 5.9l 69K miles G56 clutch will not disengage.
mash the pedal, can not put it in gear. Acts as if you were not pushing the pedal in far enough.
No noise from the throwout brg etc...
Last couple of days, clutch would not engage or disengage until the pedal was almost all the way up/out.
Do I risk a $100+ on a new hydraulic setup and hope that is the problem? Or go ahead and order a complete Southbend Clutch kit?
No evidence of leaks, fluid level was ok but dirty.
No slpiiage.

Any advice before I spend money that I do not have?
Thanks in advance.
Troy