Milling 452 heads, thousandths per CC

Print Thread

Re: Milling 452 heads, thousandths per CC [Re: DaytonaTurbo] #1395014 03/01/13 04:08 PM 03/01/13 04:08 PM
Joined: Jan 2003 Posts: 2,077 Oklahoma City Jwilli500 top fuel
Jwilli500 top fuel Joined: Jan 2003 Posts: 2,077 Oklahoma City	What I've read is .0062 per cc for OEM closed chamber heads. Quote: Do they spec a different milling amount per CC for the closed chambered heads? I would think they would require more milling per cc because of the chamber size.

Entire Thread
Subject	Posted By	Posted
Milling 452 heads, thousandths per CC	Verga	02/28/13 06:07 PM
Re: Milling 452 heads, thousandths per CC	SuperStock68Dart	02/28/13 07:19 PM
Re: Milling 452 heads, thousandths per CC	dogdays	02/28/13 10:36 PM
Re: Milling 452 heads, thousandths per CC	Verga	02/28/13 11:54 PM
Re: Milling 452 heads, thousandths per CC	JohnRR	02/28/13 11:59 PM
Re: Milling 452 heads, thousandths per CC	Verga	03/01/13 12:02 AM
Re: Milling 452 heads, thousandths per CC	Mopar-Al	03/01/13 02:12 AM
Re: Milling 452 heads, thousandths per CC	Verga	03/01/13 02:19 AM
Re: Milling 452 heads, thousandths per CC	LaRoy Engines	03/01/13 04:23 AM
Re: Milling 452 heads, thousandths per CC	Mopar-Al	03/01/13 04:48 AM
Re: Milling 452 heads, thousandths per CC	Smoparmike	03/01/13 07:10 AM
Re: Milling 452 heads, thousandths per CC	Mopar-Al	03/01/13 07:18 AM
Re: Milling 452 heads, thousandths per CC	DaytonaTurbo	03/01/13 08:53 AM
Re: Milling 452 heads, thousandths per CC	dogdays	03/01/13 06:20 PM
Re: Milling 452 heads, thousandths per CC	Jwilli500	03/01/13 08:08 PM

Hop To