Milling 452 heads, thousandths per CC

Print Thread

Re: Milling 452 heads, thousandths per CC [Re: Mopar-Al] #1395010 03/01/13 03:10 AM 03/01/13 03:10 AM
Joined: Jan 2004 Posts: 370 Bowler Wisconsin Smoparmike enthusiast
Smoparmike enthusiast Joined: Jan 2004 Posts: 370 Bowler Wisconsin	My max ported 452s have seen 210 from the beginning ( kept losing belt) and 200 degrees on a regular basis. Seven years and no leaks so far.

Entire Thread
Subject	Posted By	Posted
Milling 452 heads, thousandths per CC	Verga	02/28/13 06:07 PM
Re: Milling 452 heads, thousandths per CC	SuperStock68Dart	02/28/13 07:19 PM
Re: Milling 452 heads, thousandths per CC	dogdays	02/28/13 10:36 PM
Re: Milling 452 heads, thousandths per CC	Verga	02/28/13 11:54 PM
Re: Milling 452 heads, thousandths per CC	JohnRR	02/28/13 11:59 PM
Re: Milling 452 heads, thousandths per CC	Verga	03/01/13 12:02 AM
Re: Milling 452 heads, thousandths per CC	Mopar-Al	03/01/13 02:12 AM
Re: Milling 452 heads, thousandths per CC	Verga	03/01/13 02:19 AM
Re: Milling 452 heads, thousandths per CC	LaRoy Engines	03/01/13 04:23 AM
Re: Milling 452 heads, thousandths per CC	Mopar-Al	03/01/13 04:48 AM
Re: Milling 452 heads, thousandths per CC	Smoparmike	03/01/13 07:10 AM
Re: Milling 452 heads, thousandths per CC	Mopar-Al	03/01/13 07:18 AM
Re: Milling 452 heads, thousandths per CC	DaytonaTurbo	03/01/13 08:53 AM
Re: Milling 452 heads, thousandths per CC	dogdays	03/01/13 06:20 PM
Re: Milling 452 heads, thousandths per CC	Jwilli500	03/01/13 08:08 PM

Hop To