Milling 452 heads, thousandths per CC

Print Thread

Re: Milling 452 heads, thousandths per CC [Re: Smoparmike] #1395011 03/01/13 03:18 AM 03/01/13 03:18 AM
Joined: Jun 2004 Posts: 6,780 Alabama Mopar-Al master
Mopar-Al master Joined: Jun 2004 Posts: 6,780 Alabama	best of luck to you. Sometimes we get a good build with no core shift or other hampering issues like thin spots.

Entire Thread
Subject	Posted By	Posted
Milling 452 heads, thousandths per CC	Verga	02/28/13 06:07 PM
Re: Milling 452 heads, thousandths per CC	SuperStock68Dart	02/28/13 07:19 PM
Re: Milling 452 heads, thousandths per CC	dogdays	02/28/13 10:36 PM
Re: Milling 452 heads, thousandths per CC	Verga	02/28/13 11:54 PM
Re: Milling 452 heads, thousandths per CC	JohnRR	02/28/13 11:59 PM
Re: Milling 452 heads, thousandths per CC	Verga	03/01/13 12:02 AM
Re: Milling 452 heads, thousandths per CC	Mopar-Al	03/01/13 02:12 AM
Re: Milling 452 heads, thousandths per CC	Verga	03/01/13 02:19 AM
Re: Milling 452 heads, thousandths per CC	LaRoy Engines	03/01/13 04:23 AM
Re: Milling 452 heads, thousandths per CC	Mopar-Al	03/01/13 04:48 AM
Re: Milling 452 heads, thousandths per CC	Smoparmike	03/01/13 07:10 AM
Re: Milling 452 heads, thousandths per CC	Mopar-Al	03/01/13 07:18 AM
Re: Milling 452 heads, thousandths per CC	DaytonaTurbo	03/01/13 08:53 AM
Re: Milling 452 heads, thousandths per CC	dogdays	03/01/13 06:20 PM
Re: Milling 452 heads, thousandths per CC	Jwilli500	03/01/13 08:08 PM

Hop To