|
Re: Milling 452 heads, thousandths per CC
[Re: Verga]
#1395004
02/28/13 07:59 PM
02/28/13 07:59 PM
|
Joined: Jan 2003
Posts: 75,089 A Banana Republic near you.
JohnRR
I Win
|
I Win
Joined: Jan 2003
Posts: 75,089
A Banana Republic near you.
|
Quote:
Quote:
Those numbers look right.
Here's something to chew upon: Before you spend ONE NICKEL on those heads get the finished cost in writing. Then open up the latest Mopar Muscle and look at the bigblock head writeup.
When I started asking around for prices milling heads, I got to $400 really quickly and that was just milling head and intake surfaces, no work on valves or seats or guides or new parts. Maybe it's a lot cheaper where you are, but I would hate to spend $800 on a pair of heads when the assembled Stealth heads are $1000.
Just sayin... R.
Well..considering that the heads I have flow more than an OOTB Stealth, are fresh, needing only surfaced...I'll stay with what I have. IMO, Stealths are not the greatest investment...
|
|
|
Entire Thread
|
Milling 452 heads, thousandths per CC
|
Verga
|
02/28/13 06:07 PM
|
Re: Milling 452 heads, thousandths per CC
|
SuperStock68Dart
|
02/28/13 07:19 PM
|
Re: Milling 452 heads, thousandths per CC
|
dogdays
|
02/28/13 10:36 PM
|
Re: Milling 452 heads, thousandths per CC
|
Verga
|
02/28/13 11:54 PM
|
Re: Milling 452 heads, thousandths per CC
|
JohnRR
|
02/28/13 11:59 PM
|
Re: Milling 452 heads, thousandths per CC
|
Verga
|
03/01/13 12:02 AM
|
Re: Milling 452 heads, thousandths per CC
|
Mopar-Al
|
03/01/13 02:12 AM
|
Re: Milling 452 heads, thousandths per CC
|
Verga
|
03/01/13 02:19 AM
|
Re: Milling 452 heads, thousandths per CC
|
LaRoy Engines
|
03/01/13 04:23 AM
|
Re: Milling 452 heads, thousandths per CC
|
Mopar-Al
|
03/01/13 04:48 AM
|
Re: Milling 452 heads, thousandths per CC
|
Smoparmike
|
03/01/13 07:10 AM
|
Re: Milling 452 heads, thousandths per CC
|
Mopar-Al
|
03/01/13 07:18 AM
|
Re: Milling 452 heads, thousandths per CC
|
DaytonaTurbo
|
03/01/13 08:53 AM
|
Re: Milling 452 heads, thousandths per CC
|
dogdays
|
03/01/13 06:20 PM
|
Re: Milling 452 heads, thousandths per CC
|
Jwilli500
|
03/01/13 08:08 PM
|
|
|
|
|