Milling 452 heads, thousandths per CC

Print Thread

Re: Milling 452 heads, thousandths per CC [Re: LaRoy Engines] #1395009 03/01/13 12:48 AM 03/01/13 12:48 AM
Joined: Jun 2004 Posts: 6,780 Alabama Mopar-Al master
Mopar-Al master Joined: Jun 2004 Posts: 6,780 Alabama	they don't really handle heat temps well, when you start cutting them. I have had a lot of friends end up with cracked heads once they got hot and were ported for max effort. Seems like at temps around 210, they want to let go

Entire Thread
Subject	Posted By	Posted
Milling 452 heads, thousandths per CC	Verga	02/28/13 06:07 PM
Re: Milling 452 heads, thousandths per CC	SuperStock68Dart	02/28/13 07:19 PM
Re: Milling 452 heads, thousandths per CC	dogdays	02/28/13 10:36 PM
Re: Milling 452 heads, thousandths per CC	Verga	02/28/13 11:54 PM
Re: Milling 452 heads, thousandths per CC	JohnRR	02/28/13 11:59 PM
Re: Milling 452 heads, thousandths per CC	Verga	03/01/13 12:02 AM
Re: Milling 452 heads, thousandths per CC	Mopar-Al	03/01/13 02:12 AM
Re: Milling 452 heads, thousandths per CC	Verga	03/01/13 02:19 AM
Re: Milling 452 heads, thousandths per CC	LaRoy Engines	03/01/13 04:23 AM
Re: Milling 452 heads, thousandths per CC	Mopar-Al	03/01/13 04:48 AM
Re: Milling 452 heads, thousandths per CC	Smoparmike	03/01/13 07:10 AM
Re: Milling 452 heads, thousandths per CC	Mopar-Al	03/01/13 07:18 AM
Re: Milling 452 heads, thousandths per CC	DaytonaTurbo	03/01/13 08:53 AM
Re: Milling 452 heads, thousandths per CC	dogdays	03/01/13 06:20 PM
Re: Milling 452 heads, thousandths per CC	Jwilli500	03/01/13 08:08 PM

Hop To