383/400 stroker - 3.90, 3.91 or 3.92 crank?

Print Thread

Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank? [Re: CompWedgeEngines] #1304026 09/15/12 09:04 AM 09/15/12 09:04 AM
Joined: Feb 2008 Posts: 714 Central TEXAS!!!! sr4440 super stock
sr4440 super stock Joined: Feb 2008 Posts: 714 Central TEXAS!!!!	Without all the info, how do you expect to make an informed decision? Get the block corrected, then you will have your answer. Joe Without Data, you’re just another guy with an opinion.

Entire Thread
Subject	Posted By	Posted
383/400 stroker - 3.90, 3.91 or 3.92 crank?	YYZ	09/15/12 12:43 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	CompWedgeEngines	09/15/12 12:49 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	sr4440	09/15/12 01:04 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	gregsdart	09/15/12 01:36 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	JohnRR	09/15/12 05:28 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	67_Satellite	09/15/12 02:01 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	MR_P_BODY	09/15/12 02:56 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	YYZ	09/15/12 04:22 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	Belvedere1	09/16/12 04:52 AM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	440Jim	09/16/12 03:30 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	YYZ	09/16/12 03:57 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	JohnRR	09/16/12 09:21 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	RUNCHARGER	09/16/12 09:42 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	23T Hemmee	09/16/12 09:49 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	BSB67	09/16/12 10:28 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	Belvedere1	09/16/12 10:31 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	YYZ	09/16/12 10:53 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	Belvedere1	09/17/12 03:14 AM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	JohnRR	09/17/12 02:59 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	YYZ	09/17/12 03:06 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	YYZ	09/17/12 03:07 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	JohnRR	09/17/12 03:47 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	Thumperdart	09/17/12 04:05 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	jafr	09/15/12 05:19 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	Thumperdart	09/15/12 04:45 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	Cab_Burge	09/16/12 04:42 AM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	Evil Spirit	09/16/12 08:45 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	Brian Hafliger	09/16/12 09:04 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	Evil Spirit	09/17/12 03:48 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To