Quote: I haven't had a chance to discuss this with Jeff(MCH)yet...but,was wondering if replacing the 2.14 intakes with the 2.19's would help...or hurt the driveability and torque output of my 440? Have ANY of you done this?...what were the results?...GOOD,or BAD. Thanks in advance,guys! Randy B.
I don't think the 2.19 valves will do ANYTHING.
......but HELP.
I put 2.25 intakes in my Edelbrock Performer RPM heads and they flowed 341 cfm @ .700". The little 451 stroker made 534.9 lb-ft of torque @ 3,500 rpm, 574.0 lb-ft @ 7,200 rpm and 786.9 HP. Oh......all motor, 11.7:1 on 93 octane (the 10% ethanol stuff). Runs fine on 91 octane too.
Big valves work. But what the heck do I know, I live in a town of 909 people, elevation 5280' and the darn deer won't leave my back porch!
Have ANY of you done this?...what were the results?...GOOD,or BAD. Thanks in advance,guys! 
Randy B. 
