|
Re: Another transmission question shift
[Re: exile5700]
#2731089
01/08/20 02:02 PM
01/08/20 02:02 PM
|
Joined: Jan 2003
Posts: 26,470 Rio Linda, CA
John_Kunkel
Too Many Posts
|
Too Many Posts
Joined: Jan 2003
Posts: 26,470
Rio Linda, CA
|
Any 727 will accept an aftermarket shifter because they mount on the pan rail or tailhousing. To use a factory floor shifter, the tailhousing has to have the two "bumps" on the bottom for the shifter bracket.
The INTERNET, the MISinformation superhighway
|
|
|
Re: Another transmission question shift
[Re: stumpy]
#2731118
01/08/20 02:55 PM
01/08/20 02:55 PM
|
Joined: Jun 2019
Posts: 49 Maine
exile5700
OP
member
|
OP
member
Joined: Jun 2019
Posts: 49
Maine
|
|
|
|
Re: Another transmission question shift
[Re: stumpy]
#2731128
01/08/20 03:24 PM
01/08/20 03:24 PM
|
Joined: Aug 2011
Posts: 2,904 Pattison Texas
CSK
master
|
master
Joined: Aug 2011
Posts: 2,904
Pattison Texas
|
Check out how to videos online on installing an aftermarket auto trans cable operated floor shifter and you will see how to mount it to the trans. Normally it's a bracket that mounts where the tail housing bolts to the trans and a second bracket mounted with the pan bolts. I converted my factory shifter to cable on my 68 Charger, work awesome.
1968 Charger COLD A/C Hilborn EFI 512ci 9.7 compression, Stealth heads, 4.10 gear A518 ODtrans 4100lb,10.93 full street car trim 2020 T/A 392 Stock 11.79 @ 114.5
|
|
|
Re: Another transmission question shift
[Re: CSK]
#2731140
01/08/20 04:01 PM
01/08/20 04:01 PM
|
Joined: Aug 2003
Posts: 862 Avondale AZ
Prodart440
super stock
|
super stock
Joined: Aug 2003
Posts: 862
Avondale AZ
|
Check out how to videos online on installing an aftermarket auto trans cable operated floor shifter and you will see how to mount it to the trans. Normally it's a bracket that mounts where the tail housing bolts to the trans and a second bracket mounted with the pan bolts. I converted my factory shifter to cable on my 68 Charger, work awesome. Is there a kit to do it??
Aaron
68 Roadrunner 383/AT 69 Dart GT Conv. 383/AT 05 Dodge Ram 4x4 Cummins 06 GoManGo R/T Daytona #757 68 Coronet 440
|
|
|
Re: Another transmission question shift
[Re: Prodart440]
#2731167
01/08/20 05:29 PM
01/08/20 05:29 PM
|
Joined: Aug 2011
Posts: 2,904 Pattison Texas
CSK
master
|
master
Joined: Aug 2011
Posts: 2,904
Pattison Texas
|
Not that I know of, I bought a B&M cable & brackets & linkage that goes on the trans, made the bracket at the shifter.
1968 Charger COLD A/C Hilborn EFI 512ci 9.7 compression, Stealth heads, 4.10 gear A518 ODtrans 4100lb,10.93 full street car trim 2020 T/A 392 Stock 11.79 @ 114.5
|
|
|
Re: Another transmission question shift
[Re: CSK]
#2731206
01/08/20 07:09 PM
01/08/20 07:09 PM
|
Joined: Aug 2003
Posts: 862 Avondale AZ
Prodart440
super stock
|
super stock
Joined: Aug 2003
Posts: 862
Avondale AZ
|
Not that I know of, I bought a B&M cable & brackets & linkage that goes on the trans, made the bracket at the shifter. Thanks. I'll look into that!!
Aaron
68 Roadrunner 383/AT 69 Dart GT Conv. 383/AT 05 Dodge Ram 4x4 Cummins 06 GoManGo R/T Daytona #757 68 Coronet 440
|
|
|
|
|
|