Quote:

I've seen this at my buddies shop many times. Guys mix and match stuff. Never thinking if the ball has the right radius in relation to the cup. It looks good by eye and if you are building your engines by "looks good" or "seems to fit"... You should hang it up..

Put a radius gauge on the cup and on pushrod end, I'm willing to bet you have two different radius that don't work together..




I guess I dont have to hang it up just yet...

I took 2 different brand of adjusters and the pushrods (Manton) to a local shop. All 3 have the same radius...so, the radius(s) arent/werent the problem.

Last edited by Von; 05/10/11 05:01 PM.
72 RR, Pump gas 440, 452s, 3800 lbs, Corked, ET Radials,. 11.33@117.72. Same car, bone stock 346s, 9.5 comp, baby solid. 12.24@110.