CNC ported alum heads make your goal easier whether you stroke it or not.
With 3.91's you could be mid to high 11's with a 440 and low 11's with a 496/505.
Figure 10.5-1 compression with alum heads(pump gas friendly).Camshaft recommendations will get you as many answers as replies.
Todays hyd grinds can get it done and solids make it a little easier.Rollers are great but cost to much for me(or I am too tight).
You need to figure out what size motor,which cylinder head,intake manifold,size of headers,and what size carb before you even think about camshafts.
Then you can get a converter made that works with all of the above.
The default 500hp build in the tech archives will probably get you high 11's with a good converter and a chassis that hooks.