Welding up advance slots in M.P dist...

Print Thread

Re: Welding up advance slots in M.P dist... [Re: 72demon416] #833352 10/19/10 12:46 AM 10/19/10 12:46 AM
Joined: Oct 2004 Posts: 5,618 long island NY A Ari440 master
Ari440 master A Joined: Oct 2004 Posts: 5,618 long island NY	WELD THEM take the distributer apart two ligth spot welds , so you dont warp the plate did this on my tach drive long time ago 1.39 9.85 - 137 mph

Entire Thread
Subject	Posted By	Posted
Welding up advance slots in M.P dist...	72demon416	10/19/10 04:42 AM
Re: Welding up advance slots in M.P dist...	Ari440	10/19/10 04:46 AM
Re: Welding up advance slots in M.P dist...	Von	10/19/10 04:50 AM
Re: Welding up advance slots in M.P dist...	72demon416	10/19/10 05:18 AM
Re: Welding up advance slots in M.P dist...	six-barrel	10/19/10 05:28 AM
Re: Welding up advance slots in M.P dist...	72demon416	10/19/10 06:02 AM
Re: Welding up advance slots in M.P dist...	ademon	10/19/10 06:49 AM
Re: Welding up advance slots in M.P dist...	72demon416	10/19/10 06:59 AM
Re: Welding up advance slots in M.P dist...	Moparmal	10/19/10 07:11 AM
Re: Welding up advance slots in M.P dist...	493_DART	10/19/10 10:03 AM
Re: Welding up advance slots in M.P dist...	Crizila	10/19/10 11:55 AM
Re: Welding up advance slots in M.P dist...	Mills	10/19/10 09:21 PM
Re: Welding up advance slots in M.P dist...	can.al	10/20/10 01:23 AM
Re: Welding up advance slots in M.P dist...	493_DART	10/19/10 09:22 PM
Re: Welding up advance slots in M.P dist...	Crizila	10/19/10 10:50 PM
Re: Welding up advance slots in M.P dist...	Crizila	10/19/10 12:18 PM
Re: Welding up advance slots in M.P dist...	Von	10/19/10 01:40 PM
Re: Welding up advance slots in M.P dist...	72demon416	10/19/10 02:21 PM
Re: Welding up advance slots in M.P dist...	Dabee	10/19/10 04:26 PM
Re: Welding up advance slots in M.P dist...	CUDAJAS	10/19/10 04:44 PM
Re: Welding up advance slots in M.P dist...	Von	10/19/10 05:48 PM

Hop To