Sorry to drag up an old post, but thought this question might be better answered here. I have van pocketed arms and new Trw 3/4 ton springs in the garage waiting for warmer weather. I had planned on trimming the 3/4 ton springs before I put them in, but I can't decide how much. My truck also has a horrible case of the dodge lean. I have almost 1 inch on lean to the driver side. So should I cut one round off the new springs, or would it be better to stagger them say, one full round drive side and a half round passenger. Or should the new springs solve the lean. I would like to get this truck low. In the range of the mid america kit. I am seriously considering a spring over in the rear since I am changing the rearend. I have an 3.55 limited slip rearend sitting in the "truck parts pile".
Thanks for the help.