A little more progress. I have actually got the doors and fenders ready for primer but as those of you on the East Coast already know, we had ourselves a bit of a snow storm. My garage is too small and when I prime these pieces, I need to push the GTX outside while I do it. I'm not going to push it out in the snow right now because I would have a heck of a time pushing it back into the garage.

So, I have taken some time to take the front suspension apart. If you remember from some of my earlier posts, the K-member had some really hacked up bolt holes. I cut out a 3/8" brass plate and used it as a backing while I welded the holes back up. I did all four yesterday afternoon. They turned out great.

Stan