Quote:

---

Quote:

---

Quote:

---

Main bearings are Clevite MS-876P,rod are Clevite CB-743H.Both were supplied with the kit.The rods bearings do not have interference with the radius.

---

My rod bearings clear also. I am using Clevite CB-743HN, this replaced the CB-743H bearings as all of the "H" are now narrowed "HN" as I understand it.

Quote:

---

crank end play was checked and were in spec.It came in at .006,.004 to .009 is acceptable.

---

Mine turned out to be 0.005", so it was fine too.

---

You can't find 527HDs anymore,HNs is about the only choise.

---

i ordered CB527HND that is what i used 2 yrs ago but thay were just a hair too wide and needed files edges.