Quote:
Check to make sure the cap is cut on the c/l.
DO NOT assume that it is cut perfectly when measuring to the top of the pinion. 
What does the cap have to do with it?
I'm measuring from the mating surface, not the cap. Are you suggesting the cap may be cut too deep and bottoming before securing the bearing, therefore allowing movement?
11.33 @ 118.46 on motor
10.75 @ 125.35 w/ a little spray
Now, high Speed Open Road Racing - Silver State Classic Challenge, Nevada Open Road Challenge, Big Bend Open Road Race
Rocky Mountain Race Week 2020, 2022 2.0, Sick Week 2023
| 
