Quote:
DUDE you are definately doin it tuff.....I see you havent mentioned weather or not you are loading the gear set when setting the pattern?? I cant see any marks on the spool or ring from a lever or like?
Cuple tips, always clean the paint/paste off the both ring & pinion each time you make a shim or BL change, dont apply to much paste (which you have there)it makes for difficult reading, the extra paste tends to wipe over the tooth & disturbs the pattern.
I've been putting a wrench on a ring gear bolt and using a breaker on the pinion to apply resistance to get the pattern. I'll clean it and try again with less compound on the teeth.
Quote:
I was thinking that quite awhile back that $50 to $100 spent with a reputable mechanic would have been well spent. 
What, and miss all this fun? ...but seriously, I have the tools to do it, and it's only this bad the first time. Lesons learned this time will make the next sets easier and faster. Gotta learn somehow, right? No better way than by doing.
11.33 @ 118.46 on motor
10.75 @ 125.35 w/ a little spray
Now, high Speed Open Road Racing - Silver State Classic Challenge, Nevada Open Road Challenge, Big Bend Open Road Race
Rocky Mountain Race Week 2020, 2022 2.0, Sick Week 2023
| 
