Quote:

Quote:

Quote:

To fix the sway bar I simply removed the bar & took it to the press,, I bent the arms inward 3/4" per side.. Easy to do, it's caused no problems & never has rubbed...




Jeez, thats so simple.

Love it, especially since I don't have to open my wallet to do it.




Just like a cylinder shop press or what? How would you rig it up to get it to do what you wanted?





All you do is put the bar so one arm & the main length of the bar sit in the throat of the press, I used a piece of 1/2" flat stock as an adapter between the ram & the "V" created by the bar & simply press... The arm will bend, thats how they bent it it the first place... It's spring steel so it tries to spring back but the press will excede the springs ability & it will bend... I took a measurement before I started then when one arm is in 3/4" flip the bar & do it again...